Smart Door Maintenance
The following advice and tips will make sure that you enjoy your Smart Aluminium Door for years to come. All moving parts are virtually maintenance free, but will benefit from a simple cleaning routine every few months.
Our doors require minimal maintenance
The frequency of cleaning depends on a number of factors, including the standard of appearance that you require and the need to remove deposits that could cause damage after prolonged contact with the powder coat finish or the metal substrate.
Your location is also important, for example, if your home is situated near to the coast, your door will need extra care due the extra salt in the air. As a general rule, cleaning should be carried out before a build up of contaminants/soiling or marks appear on the door’s surface.
Key Areas for cleaning and maintenance
GLAZING – wipe away dirt use a non-abrasive window cleaning solution and grit free cloth. Rinse with clean water and wipe away any cleaning solution from the gaskets, seals and frame. Dry and polish with a clean, lint-free cloth.
GLAZING – wipe away dirt use a non-abrasive window cleaning solution and grit free cloth. Rinse with clean water and wipe away any cleaning solution from the gaskets, seals and frame. Dry and polish with a clean, lint-free cloth.
HARDWARE – with a non-abrasive cloth and warm, light detergent, clean away all dirt and rinse with clean water. Dry immediately and polish with a clean, soft, lint-free cloth
HARDWARE – with a non-abrasive cloth and warm, light detergent, clean away all dirt and rinse with clean water. Dry immediately and polish with a clean, soft, lint-free cloth
LOCKING MECHANISM – regular cleaning and lubrication every 3-6 months is recommended to keep your locks operating like new. Download our comprehensive Cleaning & Maintenance brochure for full details.
LOCKING MECHANISM – regular cleaning and lubrication every 3-6 months is recommended to keep your locks operating like new. Download our comprehensive Cleaning & Maintenance brochure for full details.
DOOR & FRAME – wipe your door and frame with fresh water and a light detergent once a month.
DOOR & FRAME – wipe your door and frame with fresh water and a light detergent once a month.
RUBBER SEALS – gently run across the seals with a light soapy solution and a non-abrasive cloth.
RUBBER SEALS – gently run across the seals with a light soapy solution and a non-abrasive cloth.
THRESHOLD – use a small brush to loosen any debris and then vacuum away the dirt.
THRESHOLD – use a small brush to loosen any debris and then vacuum away the dirt.
Download the cleaning & Maintenance guide
Please follow the links below to download or request a posted copy of the Care & Maintenance brochure.